There are many types of sprayer nozzles. The comm […]
There are many types of sprayer nozzles. The common faults and solutions of rocker arm and worm gear sprayer are introduced below.
Water tongue range is not enough:
① range is not enough, but the water tongue atomization is still good, the main reason is the nozzle speed is too fast, should be adjusted small nozzle speed.
② range is not enough and the water tongue spray poor. The reason is the work pressure is not enough, according to the request to increase the pressure.
Rotating part of the nozzle leakage:
① into the sand into the gasket, the sealing surface is not sealed, hollow shaft should be removed to clean.
② nozzle processing accuracy is not enough, the hollow shaft and sleeve shaft end face can not be closely matched, should be repaired or replaced.