you are here: Home / News / Industry News / Sprayer nozzle water tongue abnormalities

Sprayer nozzle water tongue abnormalities

Update:07-11-2017
Summary:

   If the rotary nozzle is working properly, the water […]

   If the rotary nozzle is working properly, the water tongues should have a smooth, transparent, round, dense section near the nozzle when there is no obstruction (a rocker-type water trap or an impeller of a worm gear) Water tongue gradually white and was crushed; its range should not be less than 85% of the standard value, and should be good atomization. Otherwise abnormal watery tongue.
   The reasons and solutions: ① water just leave the nozzle, the surface is rough opaque, but the water is still the mainstream circular, the nozzle processing rough, burr or injury. The nozzle should be polished or replaced nozzle. ② water just leave the nozzle to spread, there is no round dense section. The main reason is the nozzle internal damage is serious, should be replaced; rectifier distortion, should be repaired or replaced; foreign body blockage in the flow path, foreign body should be removed.

http://www.heshungardentools.com/

Copyright © 2016 Cixi heshun plastic electric appliance co.,ltd All rights reserved. Design by HWAQ